There are easy ways to speed up your home network, whether wired or wireless! Here are 6 of them…
If you have a wired or wireless network on your vi, you will want to run it as fast as possible. There are many things you can do for this, from minor software tweaks to installing new hardware.. Below, we’ll talk about simple solutions to speed up your home network.
Place your router in the right place
The signal of your wireless network will weaken as it passes through rooms and walls. Ideally, your router should be in the center of the devices connected to it, in a location that can deliver the signal directly to each of them.. However, this may not always be possible.. Therefore, it will be easier to place your router in a central area of your home, in a high place where the walls are not surrounded by much.
After placing your router, check if all devices are getting enough signal.. If there are devices where the signal does not reach enough, minor changes in the location of your router can solve the problem.
Is cable length important?
If you have a wired network, the length of the cables you use It can affect the speed, but you are unlikely to have such a problem at home.. In Cat 5 ethernet cables, the signal starts to weaken after 100 meters theoretically.
Optimize your router
It is beneficial to place your router as far as possible from sources that may disrupt the signal, such as your wireless phone and microwave oven. there is. In addition, routers use “channels” to transfer data.. If your neighbor’s router is on the same channel as yours, this can cause weak signal and slow speed. Some routers can make channel selection automatically.. But if you want to use the freest channel in your location, you can set the channel yourself. You can use programs like WifiInfoView to find unused channels.
Get a new router
You can speed up your network by purchasing a new wireless-AC router or with faster ethernet cables. 802.11ac routers can carry 1.3 gigabits per second, or 166 megabytes per second.. Cat 5, Cat 5e and Cat 6 ethernet cables can reach speeds of 100Mbps, 1000Mbps and 10,000Mbps, respectively.
Whether wired or wireless, you will need devices that support these new standards to benefit from speed improvements.. You may not notice a big difference in your internet speed as your transfer speed will be much higher than your internet speed, but local file transfers will be much faster.
Update
From your network or make sure your software and drivers are up to date to get the best performance from any hardware. Check your router for firmware updates, operating system updates, and driver updates regularly.
Find what’s blocking your network
Any app or device is using a lot of your bandwidth , can cause problems. Using NetBalancer, you can analyze network traffic in Windows and see which programs are using the most bandwidth.
For a more detailed view about bandwidth, you can use WireShark. This tool allows you to browse the traffic of the entire network, not just a specific machine, and find out which machine is slowing it down.